NextGen Adhesives | Fiber Optic, Electronic, Medical, and Custom Adhesive Solutions

View Original

NGAC TC907-22

Thermally Conductive and Electrically Insulating Adhesive

To request a FREE sample of NGAC TC907-22, complete the form or email us directly at info@nextgenadhesives.com.

See this form in the original post

DESCRIPTION:

NGAC TC907-22 is a thermally conductive and electrically insulating adhesive which can be cured at room temperature. It was designed for assembling heat sensitive components onto printed circuit boards. It is recommended for any application requiring strong adhesive bonds and excellent thermal transfer.

ADVANTAGES AND APPLICATIONS:

NGAC TC907-22 provides strong and high impact bonds which improve heat transfer while maintaining electrical insulation. It bonds to a wide range of substrates including metals, glass and plastics. The NGAC TC907-22 has a low coefficient of thermal expansion and will provide excellent resistance to mismatched substrates and very low shrinkage. Additionally, the NGAC TC907- 22 is easy to apply and is highly resistant to chemicals.

NGAC TC907-22 features the following characteristics that enable ease of use.

PROPERTIES:

*All values reported below are typical values and are for reference use only. These values are not intended for use in developing specifications. Application testing under specific conditions should be performed to determine actual results and fitness for use.

COLOR (mixed): Black

MIXED VISCOSITY, cps: 11,000

SPECIFIC GRAVITY:  1.31

MIX RATIO BY WEIGHT (R/H): 100/5.2

HARDNESS, Shore D:  90D

OPERATING TEMPERATURE: -70 to +140˚C

LAP SHEAR, ALUM TO ALUM: 1900 psi

THERMAL CONDUCTIVITY, W/M/°K: 57 E-02

PERCENT SOLIDS: 100%

POT LIFE: 20 minutes

NASA OUTGASSING: PASSES

CURE SCHEDULE:

Temperature of 25˚C for 72 hours

OR

Temperature of 65˚C for 2 hours

OR

Temperature of 95°C for 1 hour

For additional information or assistance, please call 978-436-9600.


ADDITIONAL ELECTRONIC ADHESIVE PRODUCTS

See this gallery in the original post