NextGen Adhesives | Fiber Optic, Electronic, Medical, and Custom Adhesive Solutions

View Original

NGAC UV-AB14

Low Viscosity, Fast Curing, UV Curable Urethane Acrylate

To request a FREE sample of NGAC UV-AB14, complete the form or email us directly at info@nextgenadhesives.com.

See this form in the original post

DESCRIPTION:

NGAC UV-AB14 is a low viscosity and fast curing Urethane Acrylate. This one part system is sensitive to visible light up to 460 nm. It was designed for applications requiring excellent adhesion/strength to and low shrinkage on cure with increased UV sensitivity at 415 nm+.

ADVANTAGES AND APPLICATIONS:

NGAC UV-AB14 bonds extremely well to a broad range of substrates including most plastics and metals. NGAC UV-AB14 exhibits excellent surface wetting.

NGAC UV-AB14 features the following characteristics that enable ease of use.

PROPERTIES:

*All values reported below are typical values and are for reference use only. These values are not intended for use in developing specifications. Application testing under specific conditions should be performed to determine actual results and fitness for use.

COLOR: Clear

VISCOSITY: 2,000 cps

SPECIFIC GRAVITY: 1.02

HARDNESS, Shore D: 68D

OPERATING TEMPERATURE: -30 to +120˚C

GLASS TRANSITION TEMPERATURE: 70°C

ELONGATION %: 100

CURE PROFILE:

MINIMUM INTENSITY: 200 mw/cm2

SPECTRAL OUTPUT: 400-460 Nanometers

OPTIMUM WAVELENGTH: 415 Nanometers

  • This product requires direct UV exposure to cure.

  • There is variability in UV light sources. Therefore, we recommend each user evaluate UV intensity and exposure time for their given application and UV equipment.

  • Low intensity UV light sources (200 mw/cm2) may require as much as a 10 second exposure time.

  • This product is sensitive to visible light at wavelengths greater than 400 nm.

For additional information or assistance, please call 978-436-9600.


ADDITIONAL FIBER OPTIC ADHESIVE PRODUCTS

See this gallery in the original post